Planet Technology IP DSLAM IDL-4801 - Manual (Page 614)

IDL series User Guide 614
system was idle during this period.
Util % This specifies the Utilization (in percentage) of
the system during this period
5.25.6 System manuf info Commands
5.25.6.1 Get system manuf info
Description:
This command is used to display manufacturing text information in the system.
Command Syntax:
get system manuf info
Example:
$ get system manuf info
Output:
CpeUtopiaMode : Tx 16 Bit Rx 8 Bit
NetUtopiaMode : Tx 16 Bit Rx 8 Bit
CpeUtopiaMaster : True NetUtopiaMaster : False
MaxEthMacPhy : 2 ColumbiaIdSel : 18
CpeUtopiaFreq : 40 MHz
Eth Speed : 100 Mbps
S.No | SelfMacAddr | EthPortIdSel | EthType
---------------------------------------------------
1 | 00:BB:CC:DD:EE:FF | 16 | Data Mgmt
2 | 00:BB:CC:DD:EE:FE | 17 | Data Mgmt
Dsl manuf Text Info
---------------------
Num of LBRams : 2 Num of Chips : 2
Num of Ports : 24 Interface Type : Host Bus
Chip Type : G24
Serial Number : <co-0123456>
Vendor Id : FFBSGSPN
Version Number : Z3219
Chip No Base Addr LBRam
-------------------------------