Planet Technology IP DSLAM IDL-4801 - Manual (Page 374)

IDL series User Guide 374
Delete -- Mandatory
Get -- Optional
Valid values: 1 - 65535
value <value-val> This value is mandatory for all list types. The interpretation of value
depends upon the type of the list. If the list type is discrete, then this value
is the list entry value. If the list type is range, then this value is the lower
limit of range. The upper limit of range is specified in valueto field.
Type: Create -- Mandatory
Delete -- Mandatory
Get -- Optional
valueto <valueto-val> This value is not required for discrete lists but is mandatory for lists of type
range. For range type lists this value specifies the upper limit of range.
Type: Create -- Optional
Default value: 0
Example:
$ create filter namedlist genentry listid 2 value 0xAC1901AA valueto 0xAC1901AA
Output:
Verbose Mode On
Entry Created
ListId : 2
Value : 0xAC1901AA
ValueTo : 0xAC1901AA
Verbose Mode Off:
Entry Created
Output field:
Field Description
ListId This field stores the list identifier value. There must be a row indexed on
the same id in the Generic Filter Named List Table.
Value This value is mandatory for all list types. The interpretation of value
depends upon the type of the list. If the list type is discrete, then this value
is the list entry value. If the list type is range, then this value is the lower
limit of range. The upper limit of range is specified in valueto field.
ValueTo This value is not required for discrete lists but is mandatory for lists of type
range. For range type lists this value specifies the upper limit of range.