Planet Technology IP DSLAM IDL-4801 - Manual (Page 638)

IDL series User Guide 638
Output:
Verbose Mode On
Control Plane Binary : COL 2.6.0.0.040217
Data Plane Binary : DP_B02_06_19
Output Fields:
FIELD Description
Control Plane Binary This tells about the version of the control plane
binary with which the system has come up.
Data Plane Binary This tells about the version of the data plane binary
with which the system has come up.
5.25.13 Trace Log Configuration Commands
5.25.13.1 Get trace cfg
Description:
Use this command to display the trace configuration for a specific module, or for all
modules.
Command Syntax:
get trace cfg [module <module-name>]
5.25.13.2 Modify trace cfg
Description:
Use this command to modify the trace and log configuration for a specific module
Command Syntax:
modify trace cfg module <module-name> [flow <trace-flow>] [level <trace-level>]
[syslog|net|stdout] [dest <ip-address>] [port <port-number>]
Parameters:
Name Description
module
<module-name>|all
This specifies the module, for which trace/log configuration
is to be modified.
Type : Modify – Mandatory
Get – Optional
Valid values: GCOS,OAM, CIN, GAG, CDB, CLI, ATM,
EOA, TBG, DSLME, NVM, FFC, DNCD, DATAME, GARP,