Planet Technology IP DSLAM IDL-4801 - Manual (Page 260)

IDL series User Guide 260
5.9.13 ADSL ATUR Chanperf Commands
5.9.13.1 Get adsl atur chanperf
Description:
This command is used to get.
Command Syntax:
get adsl atur chanperf [ifname <interface-name>]
Parameters:
Name Description
ifname
<interface-name>
The ADSL interface name.
Type : Get – Optional
Valid values: dsli-0 – dsli-23
Example:
$ get adsl atur chanperf ifname dsli-0
Output:
Ifname : dsli-0
Perf Valid Intervals : 10
Perf Invalid Intervals : 10
Perf valid 1Day Intvl : 20
Perf Invalid 1Day Intvl : 20
PerfData Curr15Min Curr1Day Prev1Day
Time Elapsed
/Monitored(sec) - 10 10 10
Rx Blocks 10 10 10 10
Tx Blocks 10 10 10 10
Corrected Blocks 10 10 10 10
Uncorrected Blocks 10 10 10 10
NCD Count 10 10 10 10
HEC Count 10 10 10 10
NCD Failure Count 20 20 20 20
LCD Failure Count 20 20 20 20