Planet Technology IP DSLAM IDL-4801 - Manual (Page 449)

IP DSLAM 449
status Enable | Disable This parameter specifies whether Igmp Snooping needs to be
enabled in the system.
Type: Modify -- Optional
reportsup Enable |
Disable
Report Suppression is enabled or not.
Type: Modify -- Optional
qryrespinterval
<qryrespinterval-val>
This parameter is used to derive Max Response Code to be filled
in General query that will be initiated from Columbia
Type: Modify -- Optional
Valid values: 1 - 0xff
proxyreportstatus
Enable | Disable
This parameter controls whether proxy reporting will be supported
at the global level.
Type: Modify -- Optional
versionmask v1 | v2 |
v3
This parameter controls which versions of IGMP are currently
supported at Columbia. Depending on the version mask, IGMP
messages of unsupported version, will be dropped
Type: Modify -- Optional
startupqryinterval
<startupqryinterval-val
>
This parameter specifies the interval between General Queries
sent on receiving Port Up topology change trigger.
Type: Modify -- Optional
Valid values: 1 - 0xff
startupqrycount
<startupqrycount-val>
This parameter specifies the number of General Queries sent on
receiving Port Up topology change trigger, separated by the
StartupQryInterval
Type: Modify -- Optional
Valid values: 0 - 0xff
lastmemberqrycount
<lastmemberqrycount-
val>
This parameter specifies the number of Group-specific or
Group-and-Source-specific Queries sent before assuming there
are no listener for this Group or Group-Source pair.
Type: Modify -- Optional
Valid values: 1 - 0xff
unsolicrprtinterval
<unsolicrprtinterval-val
>
This parameter specifies the interval between unsolicited
membership reports of a group sent for robustness no of
times.This field is applicable only when proxy reporting is
enabled.
Type: Modify -- Optional
Valid values: 1 - 0xff
Example:
$ get igmpsnoop cfg info