Planet Technology IP DSLAM IDL-4801 - Manual (Page 126)

IDL series User Guide 126
5.3.2 ABOND group stats Commands
5.3.2.1 Get abond group stats
Description:
Use this command to get.
Command Syntax:
get abond group stats [ifname <interface-name>]
5.3.2.2 Reset abond group stats
Description:
Use this command to reset.
Command Syntax:
reset abond group stats ifname <interface-name>
Parameters:
Name Description
Ifname
<interface-name>
This specifies the interface index used for the ATM based Multi pair Bonding
type of interfaces. Valid value is abond-X
Type: Reset － Mandatory
Get － Optional
Valid values: abond-0-abond-1
Example:
$ get abond group stats ifname abond-0
Output:
ifname : abond-0
AchievedAggrRateUpstrm : 10 AchievedAggrRateDnstrm : 12
CellLossUpstrmCurrent : 12 CellLossDnstrmCurrent : 20
CellLossUpstrmPrv15min : 12 CellLossDnstrmPrev15Min : 20
CellLossUpstrmCurrentDay : 12 CellLossDnstrmCurrentDay : 20
CellLossUpstrmPrevDay : 12 CellLossDnstrmPrevDay : 20
GroupFailureCntCurrent : 15 GroupFailureCntPrev15Min : 15
GrpFailureCntCurrentDay : 15 GrpFailureCntPrevDay : 15
GrpUnavailableSecCurrent : 15 GrpUnavailableSecPrev15Min : 15
GrpUnavailblSecCurrentDay : 15 GrpUnavailblSecPrevDay : 15
ASMTxCnt : 10 ASMRxCnt : 10