Planet Technology IP DSLAM IDL-4801 - Manual (Page 352)

IDL series User Guide 352
Type: Create -- Optional
Modify -- Optional
Valid values: 0 - 64
Default value: -----
Valuetype valuetype Value type tells, the type of value which is to be
matched/set. For leaf type nodes this field is not
valid. If gsvClfrProfileNodeAction is SetBase and
gsvClfrProfileNodeSetBaseType is Compute then
this value is used to specify the value type (U8, U16, U32), which
shall be used to compute the new base offset. This field is not
valid for other values of
gsvClfrProfileNodeSetBaseType.
Type: Create -- Optional
Modify -- Optional
Default value: -----
sbvarindex
L2Start|L3Start
This specifies setbase variable index. This field is valid only if
'SetBaseType' is 'SetFromVar'. 'L2Start' is read-only containing
Layer 2 header start offset. 'L3Start' is read-only containing Layer
3 header start offset. It should be ensured that packet is IP packet
before using 'L3Start' value
.Type: Create -- Optional
Modify -- Optional
Default value: Invalid
nodeprio
Low|High|AsInTree
This specifies the priority of profile node. Based on this priority
value, the profile node is created in fast or slow memory. In case
priority is specified as 'AsInTree', node priority will be same as
specified in the tree.
Type: Create -- Optional
Modify -- Optional
Default value: AsInTree
Example:
$ create clfr profile node pname IGMP nodeid 1 ntype binary actval eq valuetype
u16 value 0xffff offsetval 12 maskval 0xffff