Planet Technology IP DSLAM IDL-4801 - Manual (Page 676)

IDL series User Guide 676
Caution:
Ensure that the TFTP server is running on the remote host. After downloading the
image in safe mode, the system should be rebooted and no other nvram
operations should be tried on the system.
References:
upgrade command
remove command
list command
apply command
5.28.1.3 List
Description:
This command is used to list the Configuration or binary files stored on the unit
Command Syntax:
list fname [/nvram | /sdram]
Parameters:
Name Description
fname [/nvram | /sdram] This specifies whether the files of NVRAM or SDRAM
are to be listed.
/nvram – This lists all directories and files stored in
NVRAM.
/sdram - This lists all directories and files stored in
SDRAM.
Type: Optional.
Default Value: All the files present in the NVRAM or
SDRAM will be displayed.
Mode:
Super-User.
Example :
$ list fname /nvram