Planet Technology IP DSLAM IDL-4801 - Manual (Page 353)

IP DSLAM 353
Output:
Verbose Mode On
Entry Created
Profile Name : IGMP
Node Id : 3
Exported : true Node Type : Binary
Modification Mask : Act
Action : eq
Value Type : u16 Offset : 12
Mask : 0xffff
Value : 0x800
Value End : None
Set Base type : none
Shift Count : none Multiplier : none
Description : Node to match the ip address
Verbose Mode Off:
Entry Created
Output field:
Field Description
Profile Name Name of the classifier profile
Node Id Node Id, should be unique within a profile
Exported This specifies what fields of an exported node are modifiable
and can be modified while the profile is part of a classifier tree.
Node Type This specifies the type of the Classifier node
Modification Mask This specifies what fields of this nodes can be modified, if this
node is an exported node.
Action Action tells what is to be done by a node.
Value Type Value type tells the type of value, which is to be matched/set.
For leaf type nodes this field is not valid. if ActVal is SetBase and
SBaseType is Compute then this value is used to specify the
value type (U8, U16, U32), which shall be used to compute the
new base offset. This field is not valid for other values of
SBaseType.
Offset OffSet, in the packet with respect to the base offset, from where
we have to take the value, which is to be matched. If ActVal is
SetBase and SBaseType is Compute then this value is used to
specify the offset with respect to the base offset, which shall be
used to specify the field of the packet used to compute the new