3 lacp aggr commands, 1 get lacp aggr, 2 create lacp aggr – Planet Technology IP DSLAM IDL-4801 User Manual

Page 137

Advertising
background image

IP DSLAM

137

Output:

Verbose Mode On

Entry Created

Interface Index : aggr-0

IP Address : 172.25.100.100 Mask : 255.255.0.0

UseDhcp : False

Mgmt VLAN Index : 2

Mgmt S-VLAN Index : 2

Tagged Mgmt PDU Prio : 2

Oper Status : Up Admin Status : Enable

Verbose Mode Off:

Entry Created

Output Fields:

Field

Description

Interface Index

This specifies the interface index used for the Aggregator type of

interfaces. Valid Value is aggr-0

IP Address

This specifies the IP address configured for the interface.

Mask

This specifies the network mask configured for the interface. If either

of 'IP Address' or 'mask' is non-null the other must also be non-null

and vice versa.

UseDhcp

This specifies whether a DHCP client is to be triggered to obtain an

IP address for this interface from a DHCP server.

Mgmt VLAN Index

VLAN(C-Vlan) for management traffic on this interface. Non-zero

value of this field is valid only if either 'ip' field is non-zero or 'usedhcp'

field is true. If no Management Vlanid is specified (in the create

operation) or it's value is set to zero (either in create or modify

operation) then the system shall use the value of 'portvlanid'

associated with the bridge port created on this interface as the

Management Vlan Index. In case the management vlan (i.e.

'mgmtvlanid' or the associated 'portvlanid', if 'mgmtvlanid' is zero)

doesn't exist on the system then IP based management on this

management VLAN shall not happen on the interface till the

corresponding VLAN is created with the Net side port as its member.

Mgmt S-VLAN Index

Applicable only in stacked vlan mode, this is S-Vlan for management

traffic on this interface. Non-zero value of this field is valid only if

either 'ip' field is nonzero or 'usedhcp' field is true. If no management

Svlanid is specified (in the create operation) or it's value is set to zero

(either in create or modify operation) then the system shall use the

value of 'psvlanid' associated with the bridge port created on this

Advertising
This manual is related to the following products: