Planet Technology IP DSLAM IDL-4801 - Manual (Page 464)

IDL series User Guide 464
5.15 Interface Commands
5.15.1 Interface Commands
5.15.1.1 Get interface stats
Description:
Use this command to view statistics for one interface or all the interfaces.
Command Syntax:
get interface stats [ifname <interface-name>]
Parameters:
Name Description
Ifname
<interface-name>
Index of the interface having one to one mapping with
IfTable. Only Ethernet, EOA, Aggregator, HDLC,
PPPOE, IPOE, ABOND, ATM, ATM VC Aggregation
and ATM VC interface index are supported for reset
operation.
Type : Optional
Valid values: aal5-*, eth-0, eth-1,atm-*, eoa-*, dsl-*,
dslf-*, dsli-*, aggr-*, ehdlc-*, pppoe-*, pppr-*, vdsl-*,
ipoe-*, abond-* , vcaggr-*
Example:
$ get interface stats ifname eth-0
Output:
Verbose Mode On
Entry Created
Interface : eth-0 Description : eth-0
Type : ETHERNET Mtu : 1500
Bandwidth : 100000000 Phy Adddr :
00:BB:CC:DD:EE:F1
Last Change(sec) : 219 Unknown Prot Pkts : 0
Admin Status : Up Operational Status : Up
In Octets : 396312 Out Octets : 168929
In Discards : 0 Out Discards : 0
In Errors : 0 Out Errors : 0
In Ucast Pkts : 2291 Out Ucast Pkts : 2518