Planet Technology IP DSLAM IDL-4801 - Manual (Page 136)

IDL series User Guide 136
mgmtsvlanid
<mgmtsvlanid-val>
Applicable only in stacked vlan mode, this is S-Vlan for
management traffic on this interface. Non-zero value of this
field is valid only if either 'ip' field is nonzero or 'usedhcp' field
is true. If no management Svlanid is specified (in the create
operation) or it's value is set to zero (either in create or modify
operation) then the system shall use the value of 'psvlanid'
associated with the bridge port created on this interface as the
management vlan id. In case the management vlan (virtual
vlan mapped to S-VLAN and C-VLAN for the frame) doesn't
exist (ie. Virtual vlan mapped to 'mgmtsvlanid' or the
associated ' psvlanid ', if 'mgmtsvlanid' is zero) on the system
then IP based management shall not happen on the interface
till the corresponding virtual-VLAN is created with the Net side
port as its member.
Type: Create － Optional
Modify － Optional
Valid values: 0 – 4095
Default value: 0
priority <priority-val> Priority to be set in Tagged Ethernet PDUs sent on
Management VLAN over this interface. This field is valid only if
either 'ip' field is non-zero or 'usedhcp' field is true. In Native
Vlan mode this priority shall be used for C-Vlan tag while in
stacked vlan mode it shall be used for S-Vlan tag.
Type: Create － Optional
Modify － Optional
Valid values: 0 - 7
Default value: 7
enable | disable Administrative status of the interface.
Type: Create -- Optional
Modify -- Optional
Valid values: enable, disable
Default value: enable
Example:
$ create aggr intf IfName aggr-0 ip 172.25.100.100 mask 255.255.0.0 usedhcp
False mgmtvlanid 2 mgmtsvlanid 2 priority 2 enable