Planet Technology IP DSLAM IDL-4801 - Manual (Page 608)

IDL series User Guide 608
5.25.4.2 Get system crash configinfo
Description:
This command gets system crash configuration parameters..
Command Syntax:
get system crash configinfo
5.25.4.3 Modify system crash configinfo
Description:
This command modifies system crash configuration parameters
Command Syntax:
modify system crash configinfo [action reboot | debug]
Parameters:
Name Description:
Action reboot|debug This parameter defines the state of the system after
a DP IU crashes. If the action is set to reboot, the
system shall reboot after DP IU crash. If it is set to
debug, the system shall not reboot and a CLI prompt
shall be given to the user for further debugging.
Type :Modify - Optional
Valid values : reboot - debug
Example:
$ modify system crash configinfo action reboot
Output:
Crash Config Info : reboot
Output Fields:
Field Description
Crash Config Info This parameter defines the state of the system after a DP
IU crashes. If the action is set to reboot, the system shall
reboot after DP IU crash. If it is set to debug, the system
shall not reboot and a CLI prompt shall be given to the
user for further debugging.