5 bridge port map commands, 1 get bridge port map, 2 create bridge port map – Planet Technology IP DSLAM IDL-4801 User Manual

Page 179: 3 delete bridge port map

Advertising
background image

IP DSLAM

179

corresponding instance of dot1qTpFdbAddress is also the

value of an existing instance of dot1qStaticAddress. The value

internal (6) indicates that the entry is a internal entry and

cannot be deleted by the user. This entry gets created for the

IPOE/PPPOE interfaces when the bridge port over those

IPOE/PPOE interfaces gets admin enabled. The mac address

in this entry shall be the one specified in the mac address

profile and VlanId shall be the PortVlanId of the Bridge Port.

The value other (1) indicates that this is associated with a sticky

port.


5.6.5 Bridge Port Map Commands

5.6.5.1 Get bridge port map

Description:

Use this command to get.

Command Syntax:

get bridge port map [portid <portid-val>] [ifname <interface-name>]

5.6.5.2 Create bridge port map

Description:

Use this command to create.

Command Syntax:

create bridge port map portid <portid-val> ifname <interface-name>

5.6.5.3 Delete bridge port map

Description:

Use this command to delete.

Command Syntax:

delete bridge port map portid <portid-val> ifname <interface-name>

Advertising
This manual is related to the following products: