Planet Technology IP DSLAM IDL-4801 - Manual (Page 61)

IP DSLAM 61
3.6 System
This section allows users to perform commit and reboot that will be introduced as follows.
3.6.1 Commit and Reboot
This section describes how to commit the current configuration to flash or reboot the IP
DSLAM. Double Click on “Commit and Reboot” from the Function List Window. The
System Information screen appears as follows.
a. If to commit the active configuration to the flash, click on .
b. If to reboot the system and to set the boot configuration, click on .
c. Click on to close the window.