Planet Technology IP DSLAM IDL-4801 User Manual

Page 466

Advertising
background image

IDL series User Guide

466

Out Discards

The number of outbound packets chosen to be discarded even though there

were no errors.

In Errors

The number of inbound packets, which were not delivered to upper layers

because of errors.

Out Errors

The number of outbound packets chosen to be discarded because there were

errors.

In Ucast Pkts

The number of unicast packets delivered to a higher layer protocol.

Out Ucast Pkts

The total number of packets requested to be sent to unicast addresses, by

upper layer protocols.

HC In Octets

The total number of octets received on the interface, including framing

characters. This object is a 64-bit version of ifInOctets. Discontinuities in the

value of this counter can occur at re-initialization of the management system,

and at other times, as indicated by the value of ifCounterDiscontinuityTime.

Valid for eth-*.

HC OutOctets

The total number of octets transmitted out of the interface, including framing

characters. This object is a 64-bit version of ifOutOctets. Discontinuities in

the value of this counter can occur at re-initialization of the management

system, and at other times, as indicated by the value of

ifCounterDiscontinuityTime. Valid for eth-*.

In Mcast Pkts

The number of multicast packets delivered to a higher layer protocol.

Out Mcast Pkts

The total number of packets requested to be sent to multicast addresses, by

upper layer protocols.

In Bcast Pkts

The number of broadcast packets delivered to a higher layer protocol.

Out Bcast Pkts

The total number of packets requested to be sent to broadcast addresses, by

upper layer protocols.

LinkUpDnTrapEnable Indicates whether linkUp/ linkDown traps should be generated for this

interface.

Promiscous Mode

This object has a value of false if this interface only accepts packets/frames

that are addressed to this station. This object has a value of true when the

station accepts all packets/frames transmitted on the media. The value true is

legal only for Ethernet interfaces. The value of PromiscuousMode does not

affect the reception of broadcast and multicast packets/frames by the

interface.

Connector Present

This indicates whether the interface sublayer has a physical connector or not.

This is true only for physical Ethernet interfaces.

CounterDiscontTime

The value of sysUpTime on the most recent occasion, at which any one or

more of this interface's counters suffered a discontinuity.



Advertising
This manual is related to the following products: