Output fields – Planet Technology IP DSLAM IDL-4801 User Manual

Page 227

Advertising
background image

IP DSLAM

227

Output Fields:

FIELD

Description

IfName

The ADSL alarm interface name, whose profile is to be modified

or viewed

Thresh 15Min Lofs(sec)

The number of Loss of Frame Seconds encountered by an ADSL

interface, within any given 15 minutes performance data

collection period, which causes the SNMP agent to send an

'adslAtucPerfLofsThreshTrap'.

Thresh 15Min Loss(sec)

The number of Loss of Signal Seconds encountered by an ADSL

interface within any given 15 minute performance data collection

period, which causes the SNMP agent to send an

'adslAtucPerfLossThreshTrap'.

Thresh 15Min Lols(sec)

The number of Loss of Link Seconds encountered by an ADSL

interface within any given 15 minute performance data collection

period, which causes the SNMP agent to send an

'adslAtucPerfLolsThreshTrap'.

Thresh 15Min Lprs(sec)

The number of Loss of Power Seconds encountered by an ADSL

interface within any given 15 minute performance data collection

period, which causes the SNMP agent to send an

'adslAtucPerfLprsThreshTrap'.

Thresh 15Min Ess(sec)

The number of Errored Seconds encountered by an ADSL

interface within any given 15 minute performance data collection

period, which causes the SNMP agent to send an

'adslAtucPerfESsThreshTrap'.

Thresh Fast Rate Up(bps) Applies to 'Fast' channels only. Configured change in rate

causing an adslAtucRateChangeTrap. A trap is produced when:

ChanCurrTxRate >= ChanPrevTxRate plus the value of this

object.

Thresh Intl Rate Up(bps)

Applies to 'Interleave' channels only. Configured change in rate

causing an adslAtucRateChangeTrap. A trap is produced when:

ChanCurrTxRate >= ChanPrevTxRate plus the value of this

object.

Thresh Fast Rate

Down(bps)

Applies to 'Fast' channels only. Configured change in rate

causing an adslAtucRateChangeTrap. A trap is produced when:

ChanCurrTxRate <= ChanPrevTxRate minus the value of this

object.

Thresh Intl Rate

Down(bps)

Applies to 'Interleave' channels only. Configured change in rate

causing an adslAtucRateChangeTrap. A trap is produced when:

ChanCurrTxRate <= ChanPrevTxRate minus the value of this

object.

Advertising
This manual is related to the following products: