Planet Technology IP DSLAM IDL-4801 - Manual (Page 68)

IDL series User Guide 68
Field Definition
DSL Port Port No. of the IP DSLAM
VPI Virtual Path Identifier
VCI Virtual Channel Identifier
Learning Status
The state of learning on this bridge port. The value enable (1)
indicates that unicast Mac address learning is enabled and the
value disable indicates that unicast Mac address learning is
disabled on this bridge port.
Sticky Status
Indicates if the port has been set as sticky. The value enable (1)
indicates that the entries learned on this port will not be aged out.
It also indicates that the entries learned on this port shall not be
learned on any other port. The entries learned on this port can
only be removed by management action or by making the value
as disable (2), so that the entries can be aged out.
Pvid Port VID
Accepted Frame Type Used to up/down connection.
Ingress Filter
When this is true, the device will discard incoming frames for
VLANs, which do not include this Port in its Member set. When
false, the port will accept all incoming frames.
Priority Optional Connection priority. No VLAN tag, no priority.
a. Choose the port to configure from the DSL Port drop-down list.
b. Configure the Administration status as “Up” or “Down”.
c. Choose a Line Profile from the Line Profile Name drop-down list. If to configure a
Line Profile, Click on to activate the Line Profile Configuration window.
d. Choose an Alarm Profile from the Alarm Profile Name drop-down list. If to configure
an Alarm Profile, Click on to activate the Alarm Profile Configuration window.
If necessary, modify values of specified PVC, including VPI, VCI, Admin Status, Learning
Status, Sticky Status, Pvid, Accepted Frame Type and Ingress Filter, and priority.
e. Click on to submit or click on to close the fmBridgeport window.
f. If to create new PVC, click on and then PVC2 appears and then users can
set perimeters via PVC2. after that, click on to submit your setting.