Planet Technology IP DSLAM IDL-4801 - Manual (Page 156)

IDL series User Guide 156
Type: Modify -- Optional
mode auto | manual This specifies the activation/deactivation capability at a VCC.
Type: Modify -- Optional
Example:
$ get oam cc vc ifname aal5-0
Output:
ifName Mode SourceOperStatus SinkOperStatus Initiator
------------------------------------------------------------
aal5-0 Manual activated LOC Self
Output Fields:
Field Description
ifName This parameter specifies the interface, for which information is desired. In
case the field is not specified, then the information for all valid interfaces
should be displayed.
Mode This specifies the activation/deactivation capability at a VCC.
SourceOperStatus This field specifies the current operational state of source point of the VCC.
SinkOperStatus This field specifies the current operational state of sink point of the VCC.
Initiator This field is valid only in auto mode and it specifies the current initiator of CC
Activation/Deactivation.
References:
z
atm vc related commands.
z atm port and statistics related commands.
z atm oam loopback commands.