Output fields – Planet Technology IP DSLAM IDL-4801 User Manual

Page 296

Advertising
background image

IDL series User Guide

296

Max Nom AtpPsd(dB/10) : 125 Rate Adaptation : fixed

Min INP : Inp0

Upstream PSD Mask :

------------------------

[ 0] 0

Output Fields:

FIELD

Description

IfName

The ADSL line interface name, whose profile is to be modified or

viewed

Rate Adaptation

Defines what form of transmit rate adaptation is configured on

this modem. Refer to ADSL Forum TR-005 for more information.

Target Snr Margin(dB/10)

Configured Target Signal/Noise Margin. This is the Noise Margin

the modem must achieve with a BER of 10 to the power -7, or

better, to successfully complete initialization.

Max Snr Mgn(dB/10)

Configured Maximum acceptable Signal/Noise Margin. If the

Noise Margin is above this, the modem hould attempt to reduce its

power output to optimize its operation.

GsRsIntCorrectionUp

Sets the correction time for the upstream interleaved buffer. RS

can also be disabled.

Dnshift SnrMargin(dB/10)

Configured Signal/Noise Margin for rate downshift. If the noise

margin falls below this level, the modem should attempt to

decrease its transmit rate. In the case that RADSL mode is not

present, the value will be 0.

Upshift SnrMargin(dB/10)

Configured Signal/Noise Margin for rate upshift. If the noise

margin rises above this level, the modem should attempt to

increase its transmit rate. In thecase that RADSL is not present,

the value will be 0.

Min Upshift Time(sec)

Minimum time that the current margin is above UpshiftSnrMgn

before an upshift occurs. In the case that RADSL is not present,

the value will be 0.

Min Dnshift Time(sec)

Minimum time that the current margin is above UpshiftSnrMgn

before an upshift occurs. In the case that RADSL is not present,

the value will be 0.

Fast Min Tx Rate(bps)

Configured Minimum Transmit rate for 'Fast' channels, in bps.

Also refer to 'adslAtucConfRateChanRatio' for information

regarding RADSL mode and refer to ATU-R transmit rate for

ATU-C receive rates.

Intl Min Tx Rate(bps)

Configured Minimum Transmit rate for 'Interleave' channels, in

Advertising
This manual is related to the following products: