Planet Technology IP DSLAM IDL-4801 - Manual (Page 330)

IDL series User Guide 330
Default Value: 0
configstatus normal |
config
This parameter describes the configuration mode for this interface.The
value of this parameter can be normal or config. If the value is config,
then this interface shall be created, but will have a dormant status. Only
after the receipt of an EoA packet from the CPE side, this interface shall
become active.
Type: Optional
Valid Values: normal | config
Default Value: normal
m2vmacdbid
<m2vmacdbid-val> |
none
This field specifies the M2VMac Database Id associated with this
interface. The value 0 means Virtual MAC feature is disabled on this
interface. This field can be modified only when the interface is disabled.
Type: Create － Optional
Modify － Optional
Valid values: 1 - 1154
Default value: 0
Example:
$create eoa intf ifname eoa-0 lowif aal5-0 m2vmacdbid 1 enable fcs false
Output:
Verbose Mode On
Entry Created
IfName : eoa-0 LowIfName : aal5-0
FCS : False
Pkt Type : ALL
InActivity Tmr Interval : 3
M2VMac Database Id : 1
Config Status : Normal
Oper Status : Down Admin Status : Up
Output Fields:
FIELD Description
IfName The name of the interface that has been created.
LowIfName This parameter specifies the lower interface index. It
contains ifindex of the AAL5 or VC Aggregation
interface.
FCS This specifies whether Ethernet FCS needs to be
computed for the CPE side Ethernet interfaces. This can