Planet Technology IP DSLAM IDL-4801 - Manual (Page 114)

IDL series User Guide 114
5.2 802.1p commands
5.2.1 Bridge port accessprio Commands
5.2.1.1 Get bridge port accessprio
Description:
Use this command to get.
Command Syntax:
get bridge port accessprio [portid <portid-val>] [regenprio <regenprio-val >]
Parameters:
Name Description
portid <portid-val > Port number of the port for which this entry contains bridge
management information.
Type : Get-—Optional
Valid values: 1-386
regenprio <regenprio-val > Regenerated user priority from which the access priority is
mapped.
Type : Get —Optional
Valid values: 0 - 7
Example:
$ get bridge port accessprio portid 1 regenPrio 1
Output:
PortId : 1 regenPrio : 1
AcessPriority : 0
Output field:
Field Description
PortId Port number of the port for which this entry contains bridge
management information.
regenPrio Regenerated user priority from which the access priority is mapped.
AcessPriority The Outbound Access Priority the received frame is mapped to.
References:
Bridge port commands