Planet Technology IP DSLAM IDL-4801 - Manual (Page 132)

IDL series User Guide 132
Output Fields:
Field Description
ifname This specifies the interface index used for the ATM Based Multi
pair Bonding type of interfaces. Valid Value is abond-X
lowif This specifies the interface index used for the abond link (DSL)
interfaces. Valid Value is dsl-X, dsli-X, dslf-X
ASMTxCount Per-link ASM Tx count. These are not exact counts and have
been kept for debugging.
ASMRxCount Per-link ASM Rx count. These are not exact counts and have
been kept for debugging.
TxLinkFailureReason Failure reason for the abond link in Tx direction.
RxLinkFailureReason Failure reason for the abond link in Rx direction.
5.4 Aggregation commands
5.4.1 Active Standby aggr info Commands
5.4.1.1 Get actstdby aggr info
Description:
Use this command to get.
Command Syntax:
get actstdby aggr info [ifname <interface-name>]
5.4.1.2 Modify actstdby aggr info
Description:
Use this command to create.
Command Syntax:
modify actstdby aggr info ifname <interface-name> [status Enable | Disable]