8 redundancy aggrport list commands, 1 get aggrport list – Planet Technology IP DSLAM IDL-4801 User Manual

Page 151

Advertising
background image

IP DSLAM

151

FallBack

This specifies whether fallback is to happen for aggregator interface,

when a link goes down. As fallback trigger leads to re-propagation of

protocol PDUs to the links based on the state of the links, this may be

enabled if re-propagation of protocol PDUs is required for immediate

restore of peer protocol state on uplink devices. If such a treatment is

not required and Protocol time out may only be trigger for

re-propagation, Fallback trigger should be disabled.

Caution:
z

Redundancy aggregator shall not be created, if aggregator interface is not

created or if LACP aggregator is created for the aggregator interface.

References:
z

create aggr intf command

z

get aggr intf command

5.4.8 Redundancy aggrport list Commands

5.4.8.1 Get aggrport list

Description:

Use this command to get.

Command Syntax:

get rdncy aggrport list [aggrifname <interface-name>]

Parameters:

Name

Description

aggrifname

<interface-name>

Index of the redundancy aggregator, for which layer2

interfaces are associated. Valid Value is aggr-0

Type: Get -- Optional

Valid values: aggr-0

Example:

$ get rdncy aggrport list aggrifname aggr-0

Advertising
This manual is related to the following products: