Planet Technology IP DSLAM IDL-4801 - Manual (Page 158)

IDL series User Guide 158
Output Fields:
Field Description
IfName Interface Index of the ATM port, on which this VC is getting configured.
VPI This is the Virtual Circuit Identifier.
VCI This is the Virtual Port Identifier.
LB Type This specifies the loop back type used. It may be:e2e or segment.
OAM Location Id This defines the loopback site, which will loopback the cell.
OAM LB Result This specifies the result of the loop back test. It may be Result
Unavailable, Seg Succeeded, Seg Failed, E2e Succeeded, E2e Failed,
Test Aborted, or Test In Progress.
References:
z
atm vc related commands.
z
atm port and statistics related commands.
5.5.4 ATM Port Commands
5.5.4.1 Get atm port
Description:
Use this command to get.
Command Syntax:
get atm port [ifname <interface-name>]
5.5.4.2 Create atm port
Description:
Use this command to create.
Command Syntax:
create atm port ifname <interface-name> lowif <lowif-val> [ maxvc <maxvc-val> ]
[ maxvpibits <maxvpibits-val> ] [ maxvcibits <maxvcibits-val> ] [ oamsrc
<oamsrc-val> ] [ orl <orl-val> ] [ trfclassprofileid <trfclassprofileid-val> ]
[ profilename <profilename-val> ] [ ctlpktinstid <ctlpktinstid-val> ]
[ atmtransporttype cell | packet ] [ mirrormode data | mirror ] [ enable |
disable ]