Planet Technology IP DSLAM IDL-4801 - Manual (Page 176)

IDL series User Guide 176
5.6.3 Bridge Port Cap Commands
5.6.3.1 Get bridge port cap
Description:
Use this command is used to get.
Command Syntax:
get bridge port cap [portid <portid-val>]
Parameters:
Name Description
portid <portid-val> The index of base port
Type :Optional
Valid values: 1 - 386
Default value: None
Mode:
Super-User, User
Example:
$get bridge port cap
Output:
Portid : 45
Port Capabilities : Tagging FrameTypes IngressFiltering
Output Fields:
Field Description
portid The index of base port.
Port Capabilites Capabilities that are allowed on a per-port basis.