Planet Technology IP DSLAM IDL-4801 - Manual (Page 177)

IP DSLAM 177
5.6.4 Bridge port forwarding Commands
5.6.4.1 Get bridge port forwarding
Description:
Use this command to get.
Command Syntax:
get bridge port forwarding [portid <portid-val>] [vlanid <vlanid-val>] [macaddr
<macaddr-val>]
5.6.4.2 Delete bridge port forwarding
Description:
Use this command to delete.
Command Syntax:
delete bridge port forwarding portid <portid-val> [vlanid <vlanid-val>]
[macaddr <macaddr-val>]
Parameters:
Name Description
portid <portid-val> Port number of the port on which a frame having a source address equal to
the value of the corresponding instance of dot1qTpFdbAddress, has been
seen. This may have a value of "0" if the statically configured address has a
dynamic port binding and the port has not been learnt yet.
Type: Delete － Mandatory
Get － Optional
Valid values: 1 - 386
vlanid <vlanid-val> Vlan Id to uniquely identify the entry for which the bridge has forwarding
and/or filtering information. To delete an individual learned entry or all
learned entries, the FdbId should be set to a valid value in case of IVL. In
SVL case, this value is ignored except when the value is 4097, which is the
value of a special Vlan Id used for managing the traffic for those VLANs that
are neither created nor learned in the system. When Vlan transparency
feature is supported, the valid range for this also includes 4097. VLAN here
means the 802.1q Vlan in case of Native Vlan mode and Virtual Vlan in case
of Stacked Vlan Mode.
Type: Delete － Optional
Get － Optional