Planet Technology IP DSLAM IDL-4801 - Manual (Page 236)

IDL series User Guide 236
5.9.3 ADSL ATUC Channel Commands
5.9.3.1 Get adsl atuc channel
Description:
Use this command to get.
Command Syntax:
get adsl atuc channel [ifname <interface-name>]
Parameters:
Name Description
ifname <fname-val> The ADSL ATUC channel interface name.
Type: Get – Optional
Valid values: dsli-0 - dsli-23
Example:
$ get adsl atuc channel ifname dsli-0
Output:
Ifname : dsli-0
Interleave Delay(ms) : 20 Curr Tx Rate(bps) : 80
Prev Tx Rate(bps) : 40 Crc Block Length(byte) : 90
Gs Curr Atm Status : NoAtmDefect GsSymbolsPerRsWord : 10
GsRsDepth : 20 GsRedundantBytesPerRsCode: 100
AtucChanPerfAtmCD : 10 AtucChanPerfAtmCU : 10
AtucChanGsINPdn : 10 AtucChanGsL0dn : 10
AtucChanGsM0dn : 10 AtucChanGsT0dn : 10
AtucChanGsB0dn : 10
Output Fields:
FIELD Description
Ifname The ADSL ATUC channel interface name.
Interleave Delay(ms) Interleave delay for this channel.
Curr Tx Rate(bps) Actual transmit rate on this channel.
Prev Tx Rate(bps) The rate at the time of the last adslAtucRateChangeTrap
event.
Crc Block Length(byte) Indicates the length of the channel data-block, on which
the CRC operates.
Gs Curr Atm Status Indicates the current ATM Status.