Planet Technology IP DSLAM IDL-4801 - Manual (Page 257)

IP DSLAM 257
Output Fields:
FIELD Description
Ifname The ADSL interface name
IntervalNumber Count from 1 through 96, of 15 minute intervals.
Rx Blocks Count of all encoded blocks received on this channel, during this interval.
Tx Blocks Count of all encoded blocks transmitted on this channel, during this interval.
Corrected Blocks Count of all encoded blocks received with errors that were corrected on this
channel, during this interval.
Uncorrected Blocks Count of all encoded blocks received with errors that cannot be corrected,
on this channel, during this interval.
GsNoCellDelineation GlobespanVirata parameter. Count of no cell delineation (ncd) on this
channel during this interval.
GsHeaderErrorCheck Conexant parameter. Header error check counter (HEC) on this channel,
during this interval.
Valid Data This indicates if the data for this interval is valid.
AturChanIntvlNcds Count of all blocks received with NCD errors on this channel during this
interval.(length = 4 bytes).
AturChanIntvlLcds Count of all blocks received with LCD errors on this channel during this
interval.(length = 4 bytes).
References:
z
atur interval related commands
5.9.12 ADSL ATUR Channel Commands
5.9.12.1 Get adsl atur channel
Description:
Use this command to get.
Command Syntax:
get adsl atur channel [ifname <interface-name>]
Parameters:
Name Description
ifname
<interface-name>
The ADSL interface name
Type: Get － Mandatory
Valid values: dsli-0 - dsli-23