Planet Technology IP DSLAM IDL-4801 - Manual (Page 266)

IDL series User Guide 266
Elapsed/Monitored(sec) Curr1Day and Monitored seconds in Prev1Day.
LOFS (sec) Performance Data : Count of number of Loss of
Framing failures since agent was reset.
Curr15Min/Curr1Day/Prev1Day : Count of seconds
in the current 15-minute/ current 1-day/ previous 1-day interval, when
there was Loss of Framing.
LOSS (sec) Performance Data : Count of number of Loss of
signal failures since agent was reset.
Curr15Min/Curr1Day/Prev1Day : Count of seconds
in the current 15-minute/ current 1-day/ previous 1-day interval, when
there was Loss of signals.
LPRS (sec) Performance Data: Count of number of Loss of power failures, since
agent was reset.
Curr15Min/Curr1Day/Prev1Day : Count of seconds
in the current 15-minute/ current 1-day/ previous 1- day interval, when
there was Loss of power.
ES (sec) Performance Data : Count of number of errored seconds since agent
was reset.
Curr15Min/Curr1Day/Prev1Day : Count of errored seconds in the
current 15-minute/ current 1-day/ previous 1-day interval.
5.9.17 Adsl atur perfext Commands
5.9.17.1 Get adsl atur perfext
Description:
Use this command to get.
Command Syntax:
get adsl atur perfext [ifname <interface-name>]
Parameters:
Name Description
ifname <interface-name> Ifindex of the type Adsl port
Type: Get -- Mandatory
Valid values: dsl-0 – dsl-23
Example:
$ get adsl atur perfext ifname dsl-0