Planet Technology IP DSLAM IDL-4801 - Manual (Page 304)

IDL series User Guide 304
5.9.24.3 Delete dsl chip
Description:
Use this command to get.
Command Syntax:
delet dsl chip chipid <chipid-val>
Parameters:
Name Description
chipid <chipid-val> Identifies the chip to be build and initialized.
Type: Create -- Mandatory
Delete -- Mandatory
Get -- Optional
Valid values: 1 - 9
dsltype Adsl | Sdsl | Shdsl | Vdsl Identifies the firmware to be downloaded.
Type: Create -- Optional
linecoding Other | Dmt | Cap |
Qam | Mcm | Scm
ADSL line coding type. Not valid for SHDSL.
Type: Create -- Optional
adsltxcfg ansit1413 | etsi |
q9921PotsNonOverlapped |
q9921PotsOverlapped |
q9921IsdnNonOverlapped |
q9921IsdnOverlapped |
q9921TcmIsdnNonOverlapped |
q9921TcmIsdnOverlapped |
q9922PotsNonOverlapped |
q9922PotsOverlapped |
q9922TcmIsdnNonOverlapped |
q9922TcmIsdnOverlapped |
q9921TcmIsdnSymmetric |
adslPlusPotsNonOverlapped |
q9921GspanPlusPotsNonOverla
pped |
q9921GspanPlusPotsOverlapped
| q9923Adsl2PotsOverlapped |
q9923Adsl2PotsNonOverlapped |
q9925Adsl2PlusPotsOverlapped |
q9925Adsl2PlusPotsNonOverlap
ped |
q9923Readsl2PotsOverlapped |
Transmission capabilities with which the DSL system
is configured. Its default value depends on the Annex
Type supported. Not valid for SHDSL.
Type: Create -- Optional