Planet Technology IP DSLAM IDL-4801 - Manual (Page 313)

IP DSLAM 313
Output field:
Field Description
IfName This parameter specifies the name assigned to this interface. Valid
Values starts from ehdlc-0 and continues to ehdlc-*
LowIfName This specifies the lower interface index. This is the ifindex of the
DSL port on which EHDLC is being created. Valid Values start
from dsl-0 and continues to dsl-*
EHDLC Sar Status This defines the segmentation and reassembly status of the
hdlc/dsl interface. HDLC supports only 508 as frame size, to
support longer snmp messages, it should be turned off. By
default, the option taken is 'disable'.
Admin Status Administrative status of the Ehdlc interface
5.11 Ethemet Commands
5.11.1 Dot3 stats Commands
5.11.1.1 Get dot3 stats
Description:
Use this command to get.
Command Syntax:
get dot3 stats [ifname <interface-name>]
Parameters:
Name Description
ifname
<interface-name>
An index name that uniquely identifies an interface to
an ethernet-like medium.
Type: Get -- Optional
Valid values:eth-0 – eth01
Example
$ get dot3 stats Ifname eth-0
Output
IfName : eth-0
Alignment Errors : 11 FCS Errors : 12
Single Collision Frames : 13 Multiple Collision Frames : 14
Deferred Tx Frames : 15 Late Collisions : 16
Excess Collisions Frames : 17 Mac Tx Errors Frames : 18