4 clfr namedlist genentry commands, 1 get namedlist genentry, 2 create clfr namedlist genentry – Planet Technology IP DSLAM IDL-4801 User Manual

Page 337

Advertising
background image

IP DSLAM

337

Output:

Verbose Mode On

Entry Created

PortId : 2

Mac Address : 00:30:4f:a0:d1:34

Verbose Mode Off:

Entry Created

Output field:

Field

Description

PortId

Bridge Port Id, for which the port MAC

Address entry is created

Mac Address

Unicast Source MAC Address, which is to

be allowed access over the particular port.

Caution:
z

An entry in this table shall not be applicable for a bridge port created over

PPPOE/IPOE interface.


5.13.4 Clfr namedlist genentry Commands

5.13.4.1 Get namedlist genentry

Description:

Use this command to get.

Command Syntax:

get clfr namedlist genentry [listid <listid-val>] [value <value-val>]

5.13.4.2 Create clfr namedlist genentry

Description:

Use this command to create.

Command Syntax:

create clfr namedlist genentry listid <listid-val>value <value-val>




Advertising
This manual is related to the following products: