Planet Technology IP DSLAM IDL-4801 - Manual (Page 338)

IDL series User Guide 338
5.13.4.3 Delete clfr namedlist genentry
Description:
Use this command to delete.
Command Syntax:
delete clfr namedlist genentry listid <listid-val>value <value-val>
Parameter:
Name Description
listid <listid-val> This field stores the list identifier value. There must be a row
indexed on the same id in the Classifier Named List Table.
Type: Create -- Mandatory
Delete -- Mandatory
Get -- Optional
Valid values: 1 - 65535
value <value-val> This field specifies the list entry value. The value range
depends upon value type of list, as specified in Classifier
Named List table.
Type: Create -- Mandatory
Delete -- Mandatory
Get -- Optional
Example:
$ create clfr namedlist genentry listid 2 value 0xAC1901AA
Output:
Verbose Mode On
Entry Created
ListId : 2
Value : 0xAC1901AA
Verbose Mode Off:
Entry Created
Output field:
Field Description
ListId This field stores the list identifier value. There must be a row
indexed on the same id in the Classifier Named List Table.
Value This field specifies the list entry value. The value range
depends upon value type of list, as specified in Classifier
Named List table.