Planet Technology IP DSLAM IDL-4801 - Manual (Page 342)

IDL series User Guide 342
Output:
Verbose Mode On
Entry Created
IfName : eoa-1
ListId : 2
Verbose Mode Off:
Entry Created
Output field:
Field Description
IfName This specifies the eoa ,pppoe, ipoe or ethernet
interface to which named generic list is attached.
Valid values for the field are between EOA-0 and
EOA-23 or between eth-0 and eth-1or between
IPOE-0 and IPOE-191 or between PPPOE-0 and
PPPOE-192.
ListId This field stores the list identifier value.
5.13.7 Clfr profile branch Commands
5.13.7.1 Get clfr profile branch
Description:
Use this command to get.
Command Syntax:
get clfr profile branch [pname <pname-val>] [nodeid <nodeid-val>] [brtype
<brtype-val>]
5.13.7.2 Create clfr profile branch
Description:
Use this command to create.
Command Syntax:
create clfr profile branch pname <pname-val>nodeid <nodeid-val>brtype
<brtype-val> [cnodeid <cnodeid-val>]