Planet Technology IP DSLAM IDL-4801 - Manual (Page 344)

IDL series User Guide 344
Output
Verbose Mode On
Entry Created
Profile Name : IGMP
Node Id : 3 Branch type : true
Child NodeId : 5
Verbose Mode Off:
Entry Created
Output field:
Field Description
Profile Name Name of the classifier profile
Node Id Node Id of the node, with which the branch is to be
attached.
Branch type This specifies the branch types. For a unary type node,
only onlybr(0xfffffffffffffff9) branch type is allowed. For
binary type and Linear/Non-Linear(Access Deny only)
type, TrueBr(0xfffffffffffffffd) and FalseBr(0xfffffffffffffffe)
are allowed. For ternary type nodes LtBr(0xfffffffffffffffc),
GtBr (0xfffffffffffffffb), EqBr (0xfffffffffffffffa) are allowed.
For Linear, Non-Linear (match in list) the actual value is
allowed. The actual value can be U8, U16, U32, U64,
atmIf, ethernetIf, aal5vc.
Child NodeId Child Node Id
5.13.8 Clfr profile info Commands
5.13.8.1 Get clfr profile info
Description:
Use this command to get.
Command Syntax:
get clfr profile info [pname <pname-val>]