9 clfr profile node commands, 1 get clfr profile node, 2 create clfr profile node – Planet Technology IP DSLAM IDL-4801 User Manual
Page 347: 3 delete clfr profile node, 4 modify clfr profile node
IP DSLAM
347
5.13.9 Clfr profile node Commands
5.13.9.1 Get clfr profile node
Description:
Use this command to get.
Command Syntax:
get clfr profile node [pname <pname-val>] [nodeid <nodeid-val>]
5.13.9.2 Create clfr profile node
Description:
Use this command to create.
Command Syntax:
create clfr profile node pname <pname-val>nodeid <nodeid-val> [ descr
<descr-val> ] [export true|false ] Ntype
Leaf|Unary|Binary|Ternary|Linear|NonLinear modmask
Act|ValType|Offset|Mask|Val|ValueEnd|SBType|SBShiftCnt|SBMplr|Descrip|None
[ actval
Drop|Fwd|FwdToCtl|CpToCtl|Eq|Gt|Lt|InRange|TerCmp|SetPrio|MatchInList|AccD
eny|SetBase|Count|Retagprio | MatchIngenlist|GoToNextRule|allow ] [ valuetype
U8|U16|U32|U64|AtmIf|Aal5Vc|EoaIf|EthIf|Dir|Prio|Len|VlanId ][ offsetval
<offsetval-val> ] [ maskval <maskval-val> ] [ value <value-val> ] [ valend
<valend-val> ] [ sbasetype Abs|Add|Compute|SetFromVar ] [shiftcnt
<shiftcnt-val>] [ mplr <mplr-val> ] [ sbvarindex l2start|l3start ] [ nodeprio
low|high|asintree ]
5.13.9.3 Delete clfr profile node
Description:
Use this command to delete.
Command Syntax:
delete clfr profile node pname <pname-val> nodeid <nodeid-val>
5.13.9.4 Modify clfr profile node
Description:
Use this command to modify.