20 filter rule actionmap commands, 1 get filter rule actionmap, 2 create filter rule actionmap – Planet Technology IP DSLAM IDL-4801 User Manual
Page 379: 3 delete filter rule actionmap, 4 modify filter rule actionmap
IP DSLAM
379
5.13.20 Filter rule actionmap Commands
5.13.20.1 Get Filter rule actionmap
Description:
Use this command to get.
Command Syntax:
get filter rule actionmap [ruleid <ruleid-val >] [orderindex <orderindex-val >]
5.13.20.2 Create filter rule actionmap
Description:
Use this command to create.
Command Syntax:
create filter rule actionmap ruleid <ruleid-val > orderindex <orderindex-val>
action SetPrio | RetagPrio | CopyToControl | ModifyTos | SetBacLevel | PktVlanId
| RetagVlanId | PktServiceVlanId | RetagServiceVlanId | RetagServicePrio | Mirror
[priority <priority-val>] [actionval <actionval-val>] [actionmask
<actionmask-val>]
5.13.20.3 Delete filter rule actionmap
Description:
Use this command to delete.
Command Syntax:
delete filter rule actionmap ruleid <ruleid-val> orderindex <orderindex-val>
5.13.20.4 Modify filter rule actionmap
Description:
Use this command to modify.
Command Syntax:
modify filter rule actionmap ruleid <ruleid-val> orderindex <orderindex-val>
[action SetPrio | RetagPrio | CopyToControl | ModifyTos | SetBacLevel | PktVlanId
| RetagVlanId | PktServiceVlanId | RetagServiceVlanId | RetagServicePrio | Mirror]
[priority <priority-val>] [actionval <actionval-val>] [actionmask
<actionmask-val>]