Planet Technology IP DSLAM IDL-4801 - Manual (Page 388)

IDL series User Guide 388
queue. If the RuleAction is 'retagprio' then this value is priority
which is to be tagged into the outgoing packet and it is also used
along with egress port traffic class mapping table, to determine the
output queue. This field can be modified only if 'status' has the
value 'disable'.
Admin status Admin status of the rule
Stats admin status Admin status of rule statistics. Statitics of a rule are collected only
when this field is set to 'enable'. This field can be modified only if
'status' has the value 'disable'. NOTE - Statistics may not reflect
correctly the number of egress mcast, bcast and unknown unicast
packets hitting the rule.
Rule Priority Tells the priority of the rule. Based on this priority value, the rule
is created in fast or slow memory. This field can be modified only if
'status' has the value 'disable'. This field is ignored if the
'ruleAction' has value 'clfrdef'
Rule Direction Specifies whether the rule will be applied on incoming interfaces
(ingress)or outgoing interfaces(egress).
ApplyWhenReq This specifies whether this rule is to be applied only when
required. Rule description field is mandatory if this field is set to
value 'enable'. This field can be modified only if 'status' has the
value 'disable'. This field is ignored if the 'ruleAction' has value
'clfrdef'.
Pkt Type This field specifies the types of packets on which this rule is to be
applied. 'Mcast' means this rule is valid for multicast packets,
'Bcast' means this rule is valid for broadcast packets and 'Ucast'
means this rule is valid for unicast packets. This field is valid only if
'ruleDir' is 'out'. This field can be modified only if 'status' has the
value 'disable'.
Application
Description
Description of the application that receives packets matching this
rule. This field is valid and mandatory only if RuleAction is
'sendtocontrol' or RuleApplyWhenReq is 'enable'. This field can be
modified only if 'status' has the value 'disable'
Snoop Level Snoop level specifies whether packet will be snooped directly from
Interface or from Bridge after applying Bridging functionality .If
none of the Rule actions is 'sendtoControl' or 'copytocontrol', then
this field has no significance. This field can be modified only if
'status' has the value 'disable'.
Expression Id Identifies the expression id from the Generic Filter Expression
Table to be used. This field is used only if 'ruleAction' is 'exprdef'.
In absence of this field, the default relationship between all