Planet Technology IP DSLAM IDL-4801 - Manual (Page 408)

IDL series User Guide 408
5.13.28.3 Delete filter subrule ether
Description:
Use this command to delete.
Command Syntax:
delete filter subrule ether ruleid <ruleid-val > subruleid <subruleid-val >
5.13.28.4 Modify filter subrule ether
Description:
Use this command to modify.
Command Syntax:
modify filter subrule ether ruleid <ruleid-val > subruleid <subruleid-val
>[ srcmacaddrfrom <srcmacaddrfrom-val> ] [ srcmacaddrto
<srcmacaddrto-val> ] [ dstmacaddrfrom <dstmacaddrfrom-val> ] [ dstmacaddrto
<dstmacaddrto-val> ] [ ethertypefrom <ethertypefrom-val> ] [ ethertypeto
<ethertypeto-val> ] [ vlanidfrom <vlanidfrom-val> ] [ vlanidto <vlanidto-val> ]
[ priotagfrom <priotagfrom-val> ] [ priotagto <priotagto-val> ] [ dsapfrom
<dsapfrom-val> ] [ dsapto <dsapto-val> ] [ ssapfrom <ssapfrom-val> ] [ ssapto
<ssapto-val> ] [ srcmacaddrcmp eq | neq | lt | leq | gt | geq | any | inrange |
exrange ] [ dstmacaddrcmp eq | neq | lt | leq | gt | geq | any | inrange |
exrange ] [ ethertypecmp eq | neq | lt | leq | gt | geq | any | inrange | exrange ]
[ vlanidcmp eq | neq | lt | leq | gt | geq | any | inrange | exrange ] [ priotagcmp
eq | neq | lt | leq | gt | geq | any | inrange | exrange ] [ dsapcmp eq | neq | lt |
leq | gt | geq | any | inrange | exrange ] [ ssapcmp eq | neq | lt | leq | gt | geq |
any | inrange | exrange ] [ subruleprio low | high | asinrule ]
[ servicevlanidfrom <servicevlanidfrom-val> ] [ servicevlanidto
<servicevlanidto-val> ] [ servicepriotagfrom <servicepriotagfrom-val> ]
[ servicepriotagto <servicepriotagto-val> ] [ servicevlanidcmp eq | neq | lt | leq |
gt | geq | any | inrange | exrange ] [ servicepriotagcmp eq | neq | lt | leq | gt |
geq | any | inrange | exrange ]