29 filter subrule generic commands, 1 get filter subrule generic, 2 create filter subrule generic – Planet Technology IP DSLAM IDL-4801 User Manual
Page 418: 3 delete filter subrule generic, 4 modify filter subrule generic
IDL series User Guide
418
5.13.29 Filter subrule generic Commands
5.13.29.1 Get Filter subrule generic
Description:
Use this command to get.
Command Syntax:
get filter subrule generic [ruleid <ruleid-val>] [subruleid <subruleid-val >]
5.13.29.2 Create filter subrule generic
Description:
Use this command to create.
Command Syntax:
create filter subrule generic ruleid <ruleid-val> subruleid <subruleid-val>
[ offsethdr <Ethernet-val> | ip | tcp | udp | icmp | igmp | l3Hdr | ppp | pppoe ]
[ offset <offset-val> ] [ mask <mask-val> ] [ valuefrom <valuefrom-val> ] [ valueto
<valueto-val> ] [ gencmp eq | neq | lt | leq | gt | geq | any | inrange | exrange |
ingenlist | notingenlist | innamedlist | notinnamedlist ] [ subruleprio low | high |
asinrule ] [ namedlistid <namedlistid-val> ] [ transporthdr ethernet | pppoe ]
5.13.29.3 Delete filter subrule generic
Description:
Use this command to delete.
Command Syntax:
delete filter subrule generic ruleid <ruleid-val>subruleid <subruleid-val>
5.13.29.4 Modify filter subrule generic
Description:
Use this command to modify.
Command Syntax:
modify filter subrule generic ruleid <ruleid-val> subruleid <subruleid-val>
[ offsethdr <Ethernet-val> | ip | tcp | udp | icmp | igmp | l3Hdr | ppp | pppoe ]
[ offset <offset-val> ] [ mask <mask-val> ] [ valuefrom <valuefrom-val> ] [ valueto
<valueto-val> ] [ gencmp eq | neq | lt | leq | gt | geq | any | inrange | exrange |
ingenlist | notingenlist | innamedlist | notinnamedlist ] [ subruleprio low | high |
asinrule ] [ namedlistid <namedlistid-val> ] [ transporthdr ethernet | pppoe ]