30 filter subrule icmp commands, 1 get filter subrule icmp, 2 create filter subrule icmp – Planet Technology IP DSLAM IDL-4801 User Manual

Page 421: 3 delete filter subrule icmp

Advertising
background image

IP DSLAM

421

Output:

Verbose Mode On

Entry Created

Rule Id : 1 Subrule Id : 2

Offset header : tcp Offset : 20

Generic header comparison : inrange Mask : 0xFF

Subrule Priority : high Start value : 0x20

End value : 0x40

Transport Header : ethernet

NamedList Id : -

Verbose Mode Off:

Entry Created

Output field:

Field

Description

Rule Id

Unique identifier of a filter rule for which this sub rule is being

created.

Subrule Id

Unique identifier of a filter subrule.

Offset header

Type of offset header from where 'offset' to be measured. The

value 'ethernet' is invalid if the rule for which this subrule is

being created is of direction 'out'.

Offset

Offset value to be added to 'offsethdr' to get the field value

Generic header

comparison

Generic value comparision type.

Mask

Mask to be applied to the contents of a packet at 'offset'

Subrule Priority

This specifies the priority of the subrule. Based on this priority

value, the subrule is created in fast or slow memory. In case

priority is specified as 'asinrule', subrule priority will be same

as specified in the rule.

Start value

Start generic value of the range of generic values. This field is

invalid if 'gencmp' is 'any', 'ingenlist' or

'notingenlist','innamedlist',or'notinnamedlist'.This field and next

field specifiy a range of generic values,if 'gencmp' is either

'inrange' or 'exrange'

End value

End generic value of the range of generic values. This field

and the previous field specifiy a range of generic values,if

'gencmp' is either 'inrange' or 'exrange'.Otherwise this field is

invalid

Transport Header

This specifies the type of Transport header in the packet in

Advertising
This manual is related to the following products: