31 filter subrule igmp commands, 1 get filter subrule igmp, 2 create filter subrule igmp – Planet Technology IP DSLAM IDL-4801 User Manual

Page 425

Advertising
background image

IP DSLAM

425

Output field:

Field

Description

Rule Id

Unique identifier of a filter rule of which this sub rule is being

created

Subrule Id

Unique identifier of a filter subrule

Icmp type

ICMP type

Icmp code

ICMP code

ICMP type comparison ICMP type comparison type

ICMP code comparison ICMP code comparison type

Subrule Priority

This specifies the priority of the subrule. Based on

this priority value, the subrule is created in fast or

slow memory. In case priority is specified as 'asinrule', subrule

priority will be same as specified in the

rule.

Transport Header

This specifies the type of the transport header in the packet in

which the corresponding IP is being transported. If the value of

this field is ethernet, then the IP is being carried in the ethernet

header. If it is ‘pppoe’, then the corresponding IP is being carried

in the PPP header.

References:
z

Generic Filter commands


5.13.31 Filter subrule IGMP Commands

5.13.31.1 Get Filter subrule igmp

Description:

Use this command to get.

Command Syntax:

get filter subrule igmp [ruleid <ruleid-val>] [subruleid <subruleid-val>]

5.13.31.2 Create filter subrule igmp

Description:

Use this command to create.

Advertising
This manual is related to the following products: