Planet Technology IP DSLAM IDL-4801 - Manual (Page 430)

IDL series User Guide 430
5.13.32.2 Create filter subrule ip
Description:
Use this command to create.
Command Syntax:
create filter subrule ip ruleid <ruleid-val > subruleid <subruleid-val >
[ srcipaddrfrom <srcipaddrfrom-val > ] [ srcipaddrto <srcipaddrto-val > ]
[ dstipaddrfrom <dstipaddrfrom-val > ] [ dstipaddrto <dstipaddrto-val > ]
[ prototypefrom <prototypefrom-val > ] [ prototypeto <prototypeto-val > ]
[ srcaddrcmp eq | neq | lt | leq | gt | geq | any | inrange | exrange | ingenlist |
notingenlist ] [ dstaddrcmp eq | neq | lt | leq | gt | geq | any | inrange | exrange
| ingenlist | notingenlist ] [ prototypecmp eq | neq | lt | leq | gt | geq | any |
inrange | exrange ] [ ipsrcaddrmask <ipsrcaddrmask-val> ] [ ipdstaddrmask
<ipdstaddrmask-val> ] [ subruleprio low | high | asinrule ] [ transporthdr
ethernet | pppoe ] [ tosfrom <tosfrom-val> ] [ tosto <tosto-val> ] [ tosmask
<tosmask-val> ] [ toscmp eq | neq | lt | leq | gt | geq | any | inrange | exrange ]
5.13.32.3 Delete filter subrule ip
Description:
Use this command to delete.
Command Syntax:
delete filter subrule ip ruleid <ruleid-val > subruleid <subruleid-val >
5.13.32.4 Modify filter subrule ip
Description:
Use this command to modify.
Command Syntax:
modify filter subrule ip ruleid <ruleid-val > subruleid <subruleid-val >
[ srcipaddrfrom <srcipaddrfrom-val > ] [ srcipaddrto <srcipaddrto-val > ]
[ dstipaddrfrom <dstipaddrfrom-val > ] [ dstipaddrto <dstipaddrto-val > ]
[ prototypefrom <prototypefrom-val > ] [ prototypeto <prototypeto-val > ]
[ srcaddrcmp eq | neq | lt | leq | gt | geq | any | inrange | exrange | ingenlist |
notingenlist ] [ dstaddrcmp eq | neq | lt | leq | gt | geq | any | inrange | exrange
| ingenlist | notingenlist ] [ prototypecmp eq | neq | lt | leq | gt | geq | any |
inrange | exrange ] [ ipsrcaddrmask <ipsrcaddrmask-val> ] [ ipdstaddrmask
<ipdstaddrmask-val> ] [ subruleprio low | high | asinrule ] [ transporthdr