Planet Technology IP DSLAM IDL-4801 - Manual (Page 440)

IDL series User Guide 440
5.13.34.3 Delete filter subrule tcp
Description:
Use this command to delete.
Command Syntax:
delete filter subrule tcp ruleid <ruleid-val > subruleid <subruleid-val >
5.13.34.4 Modify filter subrule tcp
Description:
Use this command to modify.
Command Syntax:
modify filter subrule tcp ruleid <ruleid-val > subruleid <subruleid-val >
[ srcportfrom <srcportfrom-val > ] [ srcportto <srcportto-val > ] [ dstportfrom
<dstportfrom-val > ] [ dstportto <dstportto-val > ] [ srcportcmp eq | neq | lt | leq |
gt | geq | any | inrange | exrange ] [ dstportcmp eq | neq | lt | leq | gt | geq | any
| inrange | exrange ] [ subruleprio low | high | asinrule] [ transporthdr ethernet
| pppoe ]
Parameters:
Name Description
ruleid <ruleid-val > Unique identifier of a filter rule of which this sub rule is being created
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get --Optional
Valid values: 1-65535
subruleid <subruleid-val
>
Unique identifier of a filter subrule
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get --Optional
Valid values: 1 - 4294967295
srcportfrom
<srcportfrom-val >
Start port number of the range of source port numbers. This field is invalid
if 'srcportcmp' is 'any'.This field and 'srcportto' specify a range of tcp
source port numbers if 'srcportcmp' is either 'inrange' or 'exrange'
Type: Create -- Optional
Modify -- Optional
Default value: 0