Planet Technology IP DSLAM IDL-4801 - Manual (Page 444)

IDL series User Guide 444
5.13.35.4 Modify filter subrule udp
Description:
Use this command to modify.
Command Syntax:
modify filter subrule udp ruleid <ruleid-val> subruleid <subruleid-val>
[ srcportfrom <srcportfrom-val> ] [ srcportto <srcportto-val> ] [ dstportfrom
<dstportfrom-val> ] [ dstportto <dstportto-val> ] [ srcportcmp eq | neq | lt | leq | gt
| geq | any | inrange | exrange ] [ dstportcmp eq | neq | lt | leq | gt | geq | any |
inrange | exrange ] [ subruleprio low | high | asinrule] [ transporthdr ethernet |
pppoe ] [ transporthdr ethernet | pppoe ]
Parameters:
Name Description
ruleid <ruleid-val > Unique identifier of a filter rule of which this sub rule is being created
Type: Create --Mandatory
Delete --Mandatory Modify
Mandatory Get --Optional
Valid values: 1-65535
subruleid
<subruleid-val >
Unique identifier of a filter subrule
Type: Create --Mandatory
Delete – Mandatory
Modify-- Mandatory
Get --Optional
Valid values: 1 - 4294967295
srcportfrom
<srcportfrom-val >
Start port number of the range of source port numbers. This field is
invalid if 'srcportcmp' is 'any'. This field and 'srcportto' specifiy a range
of udp source port numbers, if 'srcportcmp' is either 'inrange' or
'exrange'
Type: Create -- Optional
Modify -- Optional
Default value: 0
srcportto
<srcportto-val >
End port number of the range of source port numbers.This field and
'srcportfrom' specifiy a range of udp source port numbers, if
'srcportcmp' is either 'inrange' or 'exrange'
Type: Create -- Optional
Modify -- Optional
Default value: 65535
dstportfrom
<dstportfrom-val >
Start port number of the range of destination port numbers. This field is
invalid if 'dstportcmp' is 'any'.This field and 'dstportto' specifiy a range of