3 igmpsnoop port info commands, 1 get igmpsnoop port info, 2 modify igmpsnoop port info – Planet Technology IP DSLAM IDL-4801 User Manual

Page 454

Advertising
background image

IDL series User Guide

454

portlist <portlist-val> |

none

This parameter specifies the list of ports on which a given

combination of (Group Address, Source Address, VlanId)

maps to a specified multicast vlan (STag, CTag)

Type: Create -- Optional

Modify -- Optional

Default value: 0

Example:

$ create igmpsnoop mvlan config grpipaddr 224.0.0.7 srcipaddr 12.23.34.45 vlanid

6 mcastvlanstag 5 mcastvlanctag 5 portlist 5 6 10

Output:

Verbose Mode On

Entry Created

Grp IPAddress : 224.0.0.7

Src IPAddres : 12.23.34.45

VLAN Index : 6

McastVlan STag : 5 McastVlan CTag : 5

PortList : 5 6 10

Verbose Mode Off:

Entry Created

Output field:

Field

Description

Grp IPAddress

This parameter specifies the Destination Group IP address for a

multicast stream. The source address and destination group

address together define a multicast stream. In case of value 0,

this parameter is ignored while determining Multicast Vlan

Src IPAddres

This parameter specifies the source IP address of the Multicast

Server. The source address and destination group address

together define a multicast stream. In case of value 0, this

parameter is ignored while determining Multicast Vlan.

VLAN Index

This parameter specifies the Dot1q tag of an IGMP packet

received. This will be PVID in case an untagged IGMP packet

was received. In case of value 0, this parameter is ignored while

determining Multicast Vlan.

McastVlan STag

This parameter specifies the Multicast SVlanId to be used in

case of stacked mode. In the native mode, this parameter is not

Advertising
This manual is related to the following products: