Planet Technology IP DSLAM IDL-4801 - Manual (Page 543)

IP DSLAM 543
5.21.5.4 Modify rl actionprofile info
Description:
Use this command to modify.
Command Syntax:
modify rl actionprofile info profileid <profileid-val> result conform | exceed |
violate action drop | allow | sendtocontrol | copytocontrol | modifytos | setbaclevel
[actionval <actionval-val>] [actionmask <actionmask-val>] [description
<description-val>]
Parameters:
Name Description
profileid
<profileid-val>
Rate limiter's action profile identifier, which uniquely identifies
the action profile.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
Valid values: 1 - 32
result conform |
exceed | violate
The result type for which action is configured to be taken.
Multiple actions can be configured for a result type.There shall
be multiple entries with same profile identifier and a result type if
multiple actions are configured for the result type. If there is no
entry configured for a result type, the action is assumed to be
'allow' for that result.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional
action drop | allow |
sendtocontrol |
copytocontrol |
modifytos | setbaclevel
Action to be taken on the packet.
Type: Create -- Mandatory
Delete -- Mandatory
Modify -- Mandatory
Get -- Optional