Planet Technology IP DSLAM IDL-4801 - Manual (Page 545)

IP DSLAM 545
Output:
Verbose Mode On
Entry Created
Action Profile Id : 1 Action Result : conform
Profile Action : copytocontrolActionVal : 0x00000000
Action Mask : 0xffffffff Application Description : lacp
Verbose Mode Off:
Entry Created
Output field:
Field Description
Action Profile Id Rate limiter's action profile identifier, which
uniquely identifies the action profile.
Action Result The result type for which action is configured to be
taken. Multiple actions can be configured for a
result type.There shall be multiple entries with
same profile identifier and a result type if multiple
actions are configured for the result type. If there is
no entry configured for a result type, the action is
assumed to be 'allow' for that result.
Profile Action Action to be taken on the packet.
ActionVal The parameter should contain valid value for some
actions that require an additional input.For
sendtocontrol and copytocontrol actions this
parameter should contain control flow id (0 - 3).
Other values are invalid for this action. For
modifytos action this parameter should contain
value to be set in tos field in the packet in the
range 0 to 255. Other values are invalid for this
action. The application of this value is dependent
on the mask field. For setbaclevel action this
parameter should contain Buffer Admission
Control level 0 or 1. Other values are invalid for
this action. This parameter is ignored for other
actions.
Action Mask This field is valid for sendtocontrol, copytocontrol
and modifytos actions only.For sendtocontrol and
copytocontrol actions this parameter should