Planet Technology IP DSLAM IDL-4801 - Manual (Page 592)

IDL series User Guide 592
5.24.2 SNTP servaddr Commands
5.24.2.1 Get sntp servaddr
Description:
Use this command to get.
Command Syntax:
get sntp servaddr
5.24.2.2 Create sntp servaddr
Description:
Use this command to create.
Command Syntax:
create sntp servaddr <ip-address>
Example:
$ create sntp servaddr 172.23.3.45
Output:
Verbose Mode On
Verbose Mode On
Entry Created
Server Addr : 172.23.3.45 Status : Standby
Verbose Mode Off
Entry Created
Output field:
Field Description
Server Addr
This specifies the IP Address of the SNTP
Server.
Status
Server is in Use. OR Server is in standby mode
i.e. not in use.